Applications
Drainex Drain Cleaner

Drainex is a liquid drain cleaner which is highly effective in the unblocking of fouled lines.
It is suitable for use in sinks, toilets, baths, showers, urinals, drains and gullies.
Features:
- Easily mixes in standing water of blocked pipes.
- Highly effective at breaking down grease, fats and organic matter.
- Forms a protective lining on pipe surfaces helping to keep them clear.
- Readily biodegradable.
Size | Code | Safety Data | Direction For Use | Technical Data | |
---|---|---|---|---|---|
1L | DRAINEX | ![]() |
![]() |
![]() |
|
20L | 20DRAINEX |
Protex De-Scaler For Central Heating Systems

Dissolves scale build up. Deposits of corrosion, scale and sludge have an insulting effect on boilers and radiators thereby vastly reducing their ability to transfer heat. In order to combat the problem of insulation within the system the boiler must work for longer periods to bring room temperatures to the desired level causing an increase fuel consumption. Cold spots may become present in radiators reducing flow and thereby reducing the ability of the radiator to function as intended. Deposits of scale in the boiler can cause a banging noise which if left untreated becomes louder with the passage of time.
Protex de-scaler is designed to effectively dissolve the lime scale build up that accumulates on the hottest internal parts of the system in areas with a hard water supply.
Features:
- Suitable for all indirect central heating systems including those containing aluminium.
- Restores boiler efficiency.
- Eliminates boiler "kettling" noise caused by scale build up.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
1L | 1LPD | ![]() |
![]() |
![]() |
|
20L | 20LPD |
Protex Leak Sealant For Central Heating Systems

Seals any small pin holing and small fractures in the system that may appear thereby dispensing with the task of replacing components such as radiators and pipes. Corrosion causes pin holing in central heating systems causing wall and floor damage which if not corrected could have long term cost implications. Leak sealant is a temporary solution and does not substitute any repair work which may be necessary.
Protex leak sealant is ideal for resolving small pin-hole leaks in radiators and weeping inaccessible joints.
It mixes and disperses easily when added to the system water and will not cause internal blockages or trap valves and pumps.
Features:
- Easy and safe to apply.
- Saves the time and cost of draining down full systems to repair small leaks.
- Will not cause blockages within the system.
- Compatible with Protex inhibitor.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
1L | 1LPL | ![]() |
![]() |
![]() |
|
20L | 20LPL |
Protex Universal Cleanser For Central Heating Systems

Cleanses, de-sludges and de-scales central heating systems. It is also an excellent pre-commission cleaner which will remove flux residues within the system. Deposits of corrosion, scale and sludge have an insulting effect on boilers and radiators thereby vastly reducing their ability to transfer heat. In order to combat the problem of insulation within the system the boiler must work for longer periods to bring room temperatures to the desired level causing an increase in fuel consumption. Black oxide sludge is magnetizable and abrasive and increases pump shaft and bearing wear ultimately leading to pump failure. Deposits of sludge and scale in the boiler can cause a banging noise which if left untreated becomes louder with the passage of time. Cold spots may become present in radiators reducing flow and thereby reducing the ability of the radiator to function as intended.
Protex universal cleanser is used to clean, de-sludge and de-scale an existing system prior to modification and/or extension. It is also an excellent pre-commissioning cleaner for new or modified systems due to its effective removal of all flux residues.
Features:
- Removes black oxide (magnetite) sludge.
- Removes flux residue and other debris.
- Leaves system ready for Protex inhibitor to be added.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
1L | 1LPU | ![]() |
![]() |
![]() |
|
20L | 20LPU |
Protex Inhibitor For Central Heating Systems

Protects different metals from the effects of corrosion, prevents scaling and helps prevent microbial growth within the system. Deposits of corrosion, scale and sludge have an insulting effect on boilers and radiators thereby vastly reducing their ability to transfer heat. In order to combat the problem of insulation within the system the boiler must work for longer periods to bring room temperatures to the desired level causing an increase fuel consumption. Corrosion causes pin holing in radiators rendering them redundant and causing wet spots to appear on floors. Black oxide sludge is magnetitic and abrasive and increases pump shaft and bearing wear ultimately leading to pump failure. Deposits of sludge and scale in the boiler can cause a banging noise which if left untreated becomes louder with the passage of time.
Protex inhibitor gives extended protection against corrosion, scale build up, boiler noise and hydrogen gassing when introduced to a thoroughly cleaned system. It is suitable for all mixed metal systems including those containing aluminium elements.
Features:
- Protects against corrosion and lime scale.
- Extends system life.
- Prevents radiator cold spots.
- Helps to prevent boiler noise.
- Controls microbial growth within the system.
- Reduces the need for frequent radiator venting.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
1L | 1LPI | ![]() |
![]() |
![]() |
|
20L | 20LPI |
Solex Solar Thermal Transfer Fluid

Solex is a physiologically harmless, green-tinted, clear liquid based on an aqueous solution higher glycols, which is used as a heat transfer medium in solar heating systems, especially those exposed to high thermal loads. The product is premixed with deionized water to give a frost resistance of about -23 °C.
Features:
- Based on higher glycoles.
- Plus anticorrosion additives.
- Premixed heat transfer medium.
- Permanent usage temperatures: approx. -23oC to +200oC.
- Suitability of plastics.
- Harmless to health.
- Applicable in any thermal solar collector.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
10L | SOLEX10 | ![]() |
![]() |
![]() |
|
25L | SOLEX25 |
Anti-Freeze

Designed to provide frost protection in environmental conditions to as low -8°C when applied at a concentraction of 20% to a central heating systems capacity.
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
5L | 5LPA | ![]() |
![]() |
![]() |
|
20L | 20LPA |
Inhibited Anti-Freeze 5L

Highly effective combined Anti-freeze and Inhibitor, which gives long term protection against scale build up, corrosion, sludge formation and possible microbial growth. Suitable for use in all indirect central heating systems.(Including those containing aluminium).
Size | Code | Safety Data | Directions For Use | Technical Data | |
---|---|---|---|---|---|
5L | 5LPIHA | ![]() |
![]() |
![]() |
|
20L | 20LPIHA |
Biozyme Ecodrain 1.5L

Ecodrain is a liquid formulation of selected enzyme strains plus a perfume for the biological control of foul odours. Its enzymes digest and remove the organic deposits that cause the odours. Regular use will help to maintain free flow in septic tanks and their connecting pipes.
Features:
- Liquid formulation for easy dosing.
- Helps keep pipes clear.
- Enhances biological activity within septic tanks.
- Can be sprayed in dry refuse containers to control odours.
- Non toxic enzyme based.
Size | Code | Safety Data | Directions For Use | Technical Data | ![]() |
|
---|---|---|---|---|---|---|
1.5L | ECO1 | ![]() |
![]() |
![]() |
||